Sulby 2 1700x700x110mm Tray with Gravity Waste

Stock Level: < 5
Order in the next --- for delivery on Tuesday 7th December
Stock Level: < 5
SKU: 17247W

Sulby 2 1700x700x110mm Tray with Gravity Waste


Product Details

Sulby 2 1700x700x110mm Tray with Gravity Waste

note: if NO waste is required the SKU is 17247


+ Above floor gravity waste with 4 possible outlet points
+ Non handed – fits left or right
+ Tiling upstand supplied with all shower trays
+ Optional pipe duct kit available
+ No under tray foaming required
+ Low depth 90mm trapped gravity waste
+ 35mm fall inside tray
+ Choice of corner, side and end ramps

+ No need to excavate the floor
+ Many flexible features make for simple fitting
+ Ensures a water tight fixing to the wall
+ No messy pipework, improving the look
+ Quick and easy installation
+ Concealed within the height of the tray therefore no need to breach floor
+ Excellent 14lpm drainage
+ Easy access for all

Product specification
+ Constructed of hand laid fibre glass, double thickness, encapsulated sterling board and steel reinforcing sections
+ Tray 110mm high
+ 30 stone load bearing on tray
+ Non handed
+ Option for Gravity or Pumped wastes
+ Tray hollow underneath to give area to hide (re-direct) existing pipe work runs
+ Supplied with separate aluminium tiling upstand
+ Can be installed on timber and concrete floors
+ 8 different stock sizes
+ ABS Gravity waste accepts 40 & 43mm pipe to BS EN 1455-1
+ 4 different pre-jigged waste exit points underneath the tray
+ 30mm flat area on external edge of tray, allowing screens to close onto a flat area

+ Pipe ducts available
+ Additional 45mm step available